Frequently Asked Questions

When paying fees to RPRA, you can select from one of the following payment methods:

• Direct debit (also known as bank withdrawal)
• Credit card
• Electronic data interchange (EDI; also commonly known as ACH or EFT)
• Electronic bill payment
• Cheque

For instructions on how to submit payment by the method you chose, read one of the following FAQs:

• How do I pay my fees to RPRA by credit card?
• How do I pay my fees to RPRA by direct debit?
• How do I pay my fees to RPRA by electronic bill payment?
• How do I pay my fees to RPRA by cheque?
• How do I pay my fees to RPRA by electronic data interchange (EDI)?

Please note:

• Invoices are due on receipt.
• Invoices are in CAD fund and payments must be sent in CAD.

Registry fees cover the Authority’s costs to build, deploy and maintain the Registry, and to provide ongoing support to Registry users. As an administrative delegated authority of the Government of Ontario, the Authority does not receive any government funding and funds its operations through fees charged to regulated parties. The Authority operates on a cost-recovery basis.

Fees are charged upon completion of the initial notice filing, whether it’s a Project Area Notice, Reuse Site Notice, or Residential Development Soil Depot Notice. For Project Area and Reuse Area Notices, there may be a fee charged at the final filing (close-out), depending on whether the volume of soil generated or accepted has increased from what was reported in the initial notice filing.

Fees associated with project area notices are calculated at a variable rate based on the volume of soil being moved. Flat fees will be applied to Project Area Notices for soil volumes below and above certain thresholds.

Fees associated with Reuse Site Notices are tiered, with increasing flat fees applied according to the volume of soil being accepted at the reuse site.

There is one flat fee associated with Residential Soil Depot Notices.

Fees will be consulted upon annually as required by the RRCEA.

If you select credit card as your method of payment, this will be done through your Registry account.

Follow these steps to complete your payment:

Follow these steps to complete your payment: 

1. In the payment method section of the Registry, select credit card as your preferred method. 
2. Enter your credit card details. 
3. Click PAY and the payment will process automatically. 

Please note: 

• Invoices are due on receipt.
• Invoices are in CAD funds and payments must be sent in CAD.
• Payment will be reflected in your Registry account once your transaction has been processed.
• Registrants can save a credit card as their preferred payment method.
• Hazardous Waste Program (HWP) registrants can enrol in Manifest Autopay with credit card as their saved payment method.

If you have questions about fee payment, contact our Compliance and Registry Team at [email protected] or call 1-833-600-0530. 

How do I pay my fees to RPRA by cheque? 

If you select cheque as your method of payment, follow these steps to complete your payment: 

1. Make your cheque payable to “Resource Productivity and Recovery Authority” 
2. Enter your Invoice Number on the memo line of the cheque 
3. Send your cheque to: 
   • Resource Productivity Recovery Authority 
   • PO Box 46114, STN A 
   • Toronto, ON 
   • M5W 4K9 

Please note: 

• Invoices are due on receipt. 
• Invoices are in CAD funds and payments must be sent in CAD. 
• It may take 2-4 weeks for your payment to be reflected in your Registry account due to mail and cheque processing times.

If you have questions relating to fee payment, contact our Compliance and Registry Team at [email protected] or call 1-833-600-0530. 

If you select direct debit (also known as bank withdrawal) as your method of payment, this will be done through your Registry account. 

Follow these steps to complete your payment: 

1. In the payment method section of the Registry, select direct debit as your preferred method. 
2. Enter your banking information/details. 
3. Review the withdrawal agreement then click “I agree to let RPRA collect my payments as per the terms of the Withdrawal Agreement.” 
4. Click PAY and the payment will process automatically. 

Please note: 

• Invoices are due on receipt.
• Invoices are in CAD funds and payments must be sent in CAD.
• Payment will be reflected in your Registry account once your transaction has been processed.
• By selecting direct debit, registrants authorize RPRA to collect payments as outlined in the withdrawal agreement.
• Registrants can save direct debit as their preferred payment method.
• Hazardous Waste Program (HWP) registrants can enrol in Manifest Autopay with direct debit as their saved payment method. 

If you have questions about fee payment, contact our Compliance and Registry Team at [email protected] or call 1-833-600-0530. 

If you select electronic bill payment as your method of payment, this will be done through your online banking account, using the bill payment functionality. It is available at most major Canadian banks (e.g., TD, RBC, BMO, Scotiabank). 

Follow these steps to complete your payment:

1. Log in to your bank account.
2. Go to the bill payment section and add RPRA as payee.
3. Enter your registration number (found on your invoice) as the account number. 

Please note:

• Invoices are due on receipt.
• Invoices are in CAD funds and payments must be sent in CAD.
• It may take 1–2 weeks for payment to be reflected in your Registry account. 

If you have questions relating to fee payment, contact our Compliance and Registry Team at [email protected] or call 647-496-0530 or toll-free at 1-833-600-0530.

If you select cheque as your method of payment, follow these steps to complete your payment: 

1.  Make your cheque payable to “Resource Productivity and Recovery Authority”
2. Enter your Invoice Number on the memo line of the cheque 
3. Send your cheque to: 
   • Resource Productivity Recovery Authority 
   • PO Box 46114, STN A 
   • Toronto, ON 
   • M5W 4K9 

Please note: 

• Invoices are due on receipt. 
• Invoices are in CAD funds and payments must be sent in CAD.
• It may take 2-4 weeks for your payment to be reflected in your Registry account due to mail and cheque processing times. 

If you have questions relating to fee payment, contact our Compliance and Registry Team at [email protected] or call 1-833-600-0530. 

If you select electronic data interchange (EDI) as your method of payment, this is an electronic payment through your bank, also commonly known as EFT or ACH.

Follow these steps to complete your payment:

1. Submit your payment using RPRA’s banking information provided on your invoice.
2. Reference your invoice number when you submit this payment to your bank so RPRA can identify your payment and send your remittance details to [email protected]

Please note:

• Invoices are due on receipt.
• Invoices are in CAD funds and payments must be sent in CAD.
• It may take 1-2 weeks for payment to be reflected in your Registry account.

If you have questions relating to fee payment, contact our Compliance and Registry Team at [email protected] or call 647-496-0530 or toll-free at 1-833-600-0530.

RPRA collects 13% Harmonized Sales Tax (HST) on applicable fees. This requirement is based on a ruling received from the Canada Revenue Agency (CRA), which determined that HST must be charged on fees collected under the Resource Recovery and Circular Economy Act, 2016 (RRCEA).

HST applies to all RRCEA producer responsibility programs, as well as the Excess Soil and Hazardous Waste programs.

Invoices issued before January 1, 2023, were amended to reflect HST. Registrants can access amended invoices in their Registry accounts under the Invoices tab, where the HST amount and the amended invoice date are shown.

Important notes:

• On the amended invoices there have been no changes to the Invoice Total and registrants will not be required to pay any additional monies to RPRA for past invoices.
• Registrants may be able to claim input tax credits for the HST collected on RPRA fees, for both the amended invoices and new invoices issued January 1, 2023, onwards. However, RPRA is not in a position to provide tax advice and suggests you consult your internal or external accountants to seek their counsel.
• All new invoices issued effective January 1, 2023, will contain appropriate information identifying the amount of the HST and other relevant details. These invoices will also be displayed under the “Invoices” tab in a registrants’ Registry account.

Registrants can access past invoices in their Registry account under a new tab labelled “Invoices”. A banner will be displayed that highlights whether an invoice has been amended to include HST as well as the date the amended invoice was reissued. This will show on all invoices with an invoice date before December 21, 2022. See sample screenshot below.

Registrants can access past invoices in their Registry account under the “Invoices & Payments” tab. From here, registrants can view, download and pay their invoices.  

See sample screenshot below: 

To request a refund for a payment made by credit card and direct debit, follow these steps:

1. Log in to your registry account.
2. Select the Program.
3. Go to the Invoices & Payment tab.
4. Scroll to the Invoices with Credit Balances table.
5. Under Action click on Request Refund.
6. Click on the green button showing the refund amount.

To request a refund for a payment made by a saved payment method (credit card or direct debit), follow these steps:

1. Log in to your registry account.
2. Select the Program.
3. Go to the Invoices & Payment tab.
4. Scroll to the Invoices with Credit Balances table Under Action click on Request Refund
5. Check the box to Confirm your Attestation to the information.
6. Click on the green button showing the refund amount.

To request a refund for a payment made by EDI, cheque or electronic bill payment, follow these steps:

1. Log in to your registry account.
2. Select the Program.
3. Go to the Invoices & Payment tab.
4. Scroll to the Invoices with Credit Balances table Under Action click on Request Refund
5. Add your banking information as refunds will only be issued by EFT
6. Check the box to Confirm your Attestation to the information.
7. Click on the green button showing the refund amount.

Note: The Request Refund button is only available for invoices that have a negative balance.

If a registrant clicks the “Request Refund” button after a refund request has already been submitted, the registrant will see the following message: “A refund has already been requested for invoice 000XXXX on XX Date. We are currently processing your request.”

To pay multiple invoices at once, follow these steps:

1. Log in to your registry account.
2. Select the Program.
3. On the program screen click Pay Now in the Total Unpaid Invoices box, located at the top right corner.
4. Click the Pay Now button for saved payment methods or select Change Payment Method.
5. Choose the payment method, then click Next.
6. If the selected payment method is credit card or debit card, please enter your banking information or your credit card information, then click the Pay button.
7. If the selected payment method is EDI, electronic bill payment, or cheque, please follow the payment instructions on-screen.

To view invoices with a credit balance by program, follow these steps:

1. Log in to your registry account.
2. Select the applicable Program.
3. On the program screen go to the Invoices & Payment tab.
4. Click on Outstanding Invoices tab.
5. Scroll down to the Invoices with Credit Balances section to view invoices with credit balances.

Only account admins can designate an accounts payable (AP) user.

An accounts payable (AP) user is responsible for managing the financial aspects of a company’s registry account.

An AP user’s functionality includes:

• Accessing and paying invoices – View, download, and make payments for invoices.
• Managing saved payment methods – Add, update, or remove stored payment options.
• Modifying data across all programs – Modify program-related information as required for billing.
• Receiving billing and payment notifications – Receive email alerts about invoices, payments, and account balances.
• Communicating with RPRA regarding billing or payment questions – Act as the main contact for financial inquiries.

Yes, designating an AP User is required for account creation. This ensures financial responsibilities are clearly assigned.

Users must designate an accounts payable (AP) user during account set up.

To add an AP user during account set up, follow these steps:

1. After adding the Business information and address, click Next.
2. After entering the Account Admin information, scroll down.
3. Enter the Account Payables User information.
4. Check the box: ✅I hereby authorize this user to create/modify data. This confirms the AP User can modify data across all programs.
5. Click Next

If you want to assign the account admin as the AP user, check the box labeled:
The Account Admin listed above is the Accounts Payable (AP) User.

This will auto-fill the AP User section with the account admin’s information.

See FAQ: 7. What is an accounts payable (AP) user and what can they do in the registry?

Follow the steps below to add an AP user to an existing account:

1. Log in to the Registry account.
2. Go to the Manage Users
3. Click on the Set Account Payable User
4. Fill in the required details (e.g., name, contact info, etc.).
5. Complete the Programs & User Access Levels section
6. Check the box: ✅I hereby authorize this user to create/modify data. This confirms the AP user can modify data across all programs.
7. Click Save

Note: The new AP user will receive an email invitation to create their password and gain access to the Registry account.

See FAQ: What is the difference between an account admin, a primary, secondary, driver, accounts payable (AP), and manifest-only user in the HWP Registry?

See FAQ: What is the difference between an account admin, a primary, secondary and accounts payable (AP) user in the registry?

How to change an existing AP user:

1. Log in to the Registry account.
2. Navigate to the Manage Users
3. Click on the Change Accounts Payable User button.
4. To select an existing Registry user, type their name or email address in the search field
5. Check the box: ✅ I hereby authorize this user to create/modify data. This confirms the AP User can modify data across all programs.
6. Click
7. To add a new user, click on “Add New User”
8. Fill in the required details (e.g., name, contact info, etc.).
9. Complete the “Programs & User Access Levels” section.
10. Check the box: ✅✅ “I hereby authorize this user to create/modify data.” This confirms the AP user can modify data across all program.
11. Click Save

RPRA invoices are due on receipt.

RPRA charges a monthly 1.5% late payment fee on outstanding invoices. Late payment fees accrue monthly until the original invoice is paid in full.

If a late payment fee is applied, registrants will receive an email notification, and a late payment fee invoice will be issued to their Registry account.